
Cryomed Pro +
Safe and reliable

Cryomed Pro+ is medical cryotherapy equipment that combines the best features from our two product lines: it is as good-looking as our flagship Cryomed Pro and has the same minimal nitrogen consumption and dual compatibility as Cryomed One.
Cryomed Pro+ features the most advanced safety system. Its compliance with the most rigorous requirements set out in EC Directive 93/42/EEC, as well as in the latest version of EN ISO 13485:2016, was confirmed by TÜV Rheinland, one of the most reputable certification bodies.
Safest cryosauna in the market
Cryomed Pro+ cryo chamber is equipped with all features to ensure a safe and controlled environment for cryotherapy sessions:
- head proximity sensor which does not initiate the session or shuts it down if the customer’s head is not detected at the required level;
- open door sensor, which stops the session if the cabin door is open for any reason;
- emergency stop button for the operator to be able to stop the session at any time.
Moreover, in response to the requirements of quality standards for medical equipment, the safety features were further enhanced with:
- an operator sensor to make sure that the operator stays at the control panel at all times during the session;
- LN overflow protection, both electronic and mechanical, to prevent any access of liquid nitrogen into the cabin;
- an additional module to monitor the cryosauna’s main controller which can shut the session down if any malfunction is detected.
In addition, all safety features are duplicated so that if one fails the other steps in.
Benefits of Cryomed Pro+

- Enhanced safetyMultiple onboard sensors for maximum protection
- Medical certificationSuitable for healthcare facilities, TÜV Rheinland certified
- Lowest nitrogen consumptionOnly 2.5 liters for a three-minute session
- Dual nitrogen feedCompatible with both pressurized and non-pressurized tanks
What Cryosauna is best?
Choose a model best suited for your needs and location

Design your own Cryomed Pro+
Tailor Cryomed Pro + to your needs:
- Add customized branding
- Select outer shell colour
- Choose inner upholstery colour
To visualize optional colors, go to our Color Configurator
Contact our sales department for the full list of available options
Learn your options to grow your business
Fast return on investment
For this type of cryo chambers, nitrogen will be your major daily consumable. Therefore, it is wise to choose the most efficient model to save in the long run. Cryomed Pro+ features the lowest nitrogen consumption in the market: 2.6 kgs for cooling and 0.66 kgs for one minute of the session on average. To put this in perspective, average nitrogen consumption in similar cryo chambers is more than 1 kg per minute.
In addition, Cryomed Pro+ cryosauna is supported by a 3-year, or 6,000 sessions warranty meaning you can focus on growing your business while our technicians take care of the rest.
Advanced set
Standard set
Medical set
- Length: 160 cm
- Width: 101 cm
- Height: 245 cm
- M-size cabin
- Internal: D 85 cm, H 160 cm
- External: D 100 cm, H 174 cm
- 220V ± 22V AC, 50Hz
- 110V ± 11V AC, 50-60Hz
- 220V ± 22V AC, 50Hz
- 110V ± 11V AC, 50-60Hz
- 220V ± 22V AC, 50Hz
- 110V ± 11V AC, 50-60Hz
- For cooling
- 2.87 liters (Dewar type)
- 3.25 liters (valve and dual types)
- For cooling
- 2.87 liters (Dewar type)
- 3.25 liters (valve and dual types)
- For cooling
- 3.25 liters
- Per session
- 4.05 liters (Dewar type)
- 2.48 liters (valve and dual types)
- Per session
- 4.05 liters (Dewar type)
- 2.48 liters (valve and dual types)
- Per session
- 2.48 liters
- From a non-pressurized Dewar tank (Dewar version). A cryosauna comes with two 40-liter Dewars.
- From a pressurized tank (valve version). The standard set does not include the tank itself, only a cryogenic valve.
- Dual nitrogen feed (Dewar-valve version). With a special module a cryosauna is compatible with both pressurized and non-pressurized tanks. Comes with 2 tanks and a feeder.
- From a non-pressurized Dewar tank (Dewar version). A cryosauna comes with two 40-liter Dewars.
- From a pressurized tank (valve version). The standard set does not include the tank itself, only a cryogenic valve.
- Dual nitrogen feed (Dewar-valve version). With a special module a cryosauna is compatible with both pressurized and non-pressurized tanks. Comes with 2 tanks and a feeder.
- From a pressurized tank (valve version). The standard set does not include the tank itself, only a cryogenic valve.
- Dual nitrogen feed (Dewar-valve version). With a special module a cryosauna is compatible with both pressurized and non-pressurized tanks. Comes with 2 tanks and a feeder.
- Open door sensor
- Pressure release valve (valve and dual type only)
- Emergency stop
- Nitrogen level sensor
- Optical customer position sensor
- Optical operator sensor
- Open door sensor
- Pressure release valve (valve and dual type only)
- Emergency stop
- Nitrogen level sensor
- Open door sensor
- Pressure release valve
- Emergency stop
- Dual nitrogen level sensor
- Dual optical customer position sensor
- Dual optical operator sensor
- Mechanical nitrogen overflow protection
- Monitoring module
- RGB LED at the top and under the cabin
- RGB LED inside the lower box
- RGB LED at the top and under the cabin
- RGB LED at the top and under the cabin
- Footwear for sessions, 2 pairs
- Elevator pad, 1 pc
- Active reporting system (status reports sent to email)
- Dewar limit switches (Dewar type)
- Remote control with a mobile device
- Bluetooth audio system
- Footwear for sessions, 2 pairs
- Elevator pad, 1 pc
- Active reporting system (status reports sent to email)
- Dewar limit switches (Dewar type)
- Remote control with a mobile device
- Footwear for sessions, 2 pairs
- Elevator pad, 1 pc
- Active reporting system (status reports sent to email)
3-year or max 6,000- session warranty, for components only
3-year or max 6,000- session warranty, for components only
3-year or max 6,000- session warranty
Cryomed’s Pro lineup models have a comparatively small footprint, around 3 square meters. But it is safer to go with a location measuring roughly 9 square meters to have enough space for nitrogen tank(s) and a changing room. Make sure to leave at least 300 mm between the walls and the machine on either side.
Another important consideration: due to the machine’s weight, up to 350 kg, it should be installed on a solid floor, preferably concrete or tiled. Wood or similar flooring is a bad call. It is crucial to ensure that the floor is as flat as possible.
When deciding on a room where to set up your cryosauna, be sure to measure the size of ANY door frames you will need to use to carry the machine into the room. For the Pro lineup, the door frames should be at least 770 mm wide to make the delivery possible.
You have to make a 100 mm opening in a wall for the exhaust system so that nitrogen vapors can be extracted properly while a cryosauna is in operation. Alternatively, the pipe can be integrated into a window (vent sash) as long as a proper tight fit for the pipe is provided.
The room temperature should be between 15°C and 24°C with the humidity below 60%. Air-conditioning and ventilation with actively circulating air (both in and out) are strongly advised (mechanical supply and extract). Oxygen sensors are recommended, too.
The entire assembly of any models in the Pro lineup takes roughly two hours.
Other products







